How the electric wire machine works
Wire puller is a special tool that is widely used in wire pulling and cable installation. It is mainly composed of wire puller body/pressing head and cable pulling tube. Its working principle is: firstly, the cable pulling tube is installed on the body of the wire pulling machine, the wire pulling cable is put into the cable pulling tube, and the automatic stretching action of the machine is realized through the switch control mechanism from the switch entrance of the machine. Secondly, a limit device is installed on the body of the cable pulling machine to stop the cable pulling and avoid the cable breakage caused by asking the cable pulling distance is too long. Finally, the press head is installed on the wire puller body of the machine and the wire puller on the press head is installed on the wire puller body to press the wire pulling cable on the wire puller body to realize the wire pulling cable installation function.
1.The key of the cable tractor is composed of three vast majority of diesel engines, transmissions and transmission equipment of famous Chinese brands. Transmission equipment shaft rod selection left and right opening and closing retreat, so that the cable line reasonable tension and relaxation. Cable traction machine with engine as the power unit, through the transmission drive spindle bearing transmission gear transmission chain, transmission chain teeth bite transmission equipment, drive transmission belt, complete uniform linear motion, the equipment is also modified support frame to support the point equipment operation of the cable line recoil, maintain the transmission cable line when the equipment did not move.
2.cable traction machine actual operation is simple, manual type after starting the equipment has four actual operating gears each for picking the required gear. Shift before the gas pedal to the pending speed situation, hang up the gear after manipulating the gas pedal in the hand can work. After the application is over, turn off the rest fire power switch can be.
