Wire heating solution

1. Check whether the wire is overloaded: If the wire is overloaded, you should promptly reduce the load, or increase the cross-sectional area of the wire or replace the wire.
2. Replace the electrical equipment: If the wire is not overloaded, but the power of electrical equipment is too large, the same will cause the wire to heat up, at this time should be replaced with less powerful equipment.
3.  Replace the wire: If the wire is aging or broken, the wire should be replaced in a timely manner.
4.  Improve heat dissipation conditions: If the environmental conditions around the wire is poor, you can take measures such as installing heat sinks, ventilation holes, etc., to improve the heat dissipation conditions of the wire, to reduce the purpose of wire heating.
5. Change the direction of the line: If the wire for a long time after bending or twisting state, may also lead to wire heating, you can adjust the direction of the wire to keep it straight.
6. Reduce the length of the wire: If you need to transport electricity over long distances, you can use high-voltage transmission lines, so that the loss of electricity is reduced, reducing the length of the wire.

We select the cable, the family’s normal electricity consumption, choose to meet the current normal operation of the cable, if more than the load, you can let the cable run for a period of time to rest for a period of time, alternately, to avoid the cable overheating caused by dangerous, high-quality cable products, can reduce the chances of danger.