Electrolytic copper
Crude copper (containing 99% copper) is pre-made into a thick plate as the anode and pure copper into a thin sheet as the cathode, and a mixture of sulfuric acid and copper sulfate is used as the electrolyte.
Tagged: Electrical Wire
Copper wire
Purple copper wire is a wire with purple copper as the conductor material, usually consisting of a purple copper core and insulation material.
Substation
The substation is an important facility in the power system for transforming and distributing electric energy, mainly used to step up or step down the transmitted electric energy to adapt to different voltage levels...
Copper tape
Copper strip is usually made of high purity copper material, which is rolled and drawn in multiple stages.
Copper Foil
Copper foil is a cathodic electrolytic material that is deposited as a thin, continuous layer of metal foil on the substrate layer of the circuit board, which acts as the conductive body of the PCB.
Nickel-Zinc Ferrite
Ni-Zn ferrite is a soft magnetic material made from Ni-Zn mixed oxide, Fe2O3 and other auxiliary materials through a series of processes.
Current Sensor
Current sensor, a detection device, can feel the information of the measured current, and is usually used to monitor the current changes in the power system.
High permeability
High permeability refers to the permeability of a material in the presence of a magnetic field. Permeability is the ability of a material to respond to a magnetic field and is usually expressed as the ratio of magnetic flux density to magnetic field strength.
Polyetheretherketone (PEEK)
Polyetheretherketone (PEEK) is a polymer consisting of a ketone bond and two repeating units of the ether bond in the main chain structure, and is a special polymer material.
Polytetrafluoroethylene (PTFE)
Polytetrafluoroethylene (PTFE) is a polymer material with excellent chemical stability, thermal stability and wear resistance.