1TB storage version comes standard with Huawei Mate 60
Today, Huawei has put the standard 1TB storage variant of the Huawei Mate 60 on the shelves of its official Chinese online store – Vmall . The phone was initially announced with 512GB ROM only for early buyers.
The standard Huawei Mate 60 1TB storage variant is priced at 6,999 yuan ($966, €901). Recently, Huawei also opened up the 1TB storage version of the Huawei Mate 60 Pro to buyers online. Therefore, customers with higher memory needs can choose one.
What’s more interesting is that both the standard and Pro versions of the Huawei Mate 60 series are available in 256GB RAM versions. The tech company might sell it around this week.
Huawei Mate 60 Specifications:
Huawei Mate 60 comes with a large 6.69-inch screen that produces 1.07 billion colors with P3 wide color gamut. The screen panel is OLED and supports 1-120hz LTPO adaptive refresh rate for smoother rendering. The screen also features 1440Hz high-frequency PWM dimming and 300hzh touch sampling rate.
The resolution is FHD+ (2688 x 1216 pixels). The entire screen is protected by second-generation Kunlun glass, which is more durable and drop-proof than its predecessor.
The screen has a single hole punch design that accommodates the 13MP ultra-wide angle camera with f/2.4 aperture.
On the back, you will see a large circular camera bump. It has a triple camera system including the primary 50MP Super Optical Variable Aperture camera (F1.4-F4.0 aperture) with optical image stabilization. In the secondary slot, the phone comes with a 12 MP super wide angle camera. The third is a 12 MP periscope telephoto camera with optical image stabilization.
The standard Huawei Mate 60 also comes with a large battery with a capacity of 4,750 mAh that can be charged using a 66W charger. Further, the Huawei Mate 60 series runs HarmonyOS 4 out of the box and comes with various smart features.
Enameled wire plays an important role in cell phones. It is widely used to connect coils and inductors, drivers and vibrators, flexible circuit boards, and other electronic components. Enameled wire provides electrical isolation and protection through an insulating layer, as well as good electrical conductivity and flexibility properties, adapting to the miniaturized design requirements of cell phones.
Coils and Inductors: Various coils and inductors in cell phones are often made from enameled wire. These coils and inductors are used for signal transmission, power conversion and filtering. The insulation of enameled wires prevents short circuits between coils and provides electrical isolation.
Drivers and Vibrators: Drivers and vibrators in cell phones typically use enameled wire as the coil. The driver is used to control the operation of the speaker and vibrator, and the enameled wire provides the conductive function and insulation protection for the coil.
Flex PCBs: Flex PCBs in cell phones often use enameled wires as wire connectors. The soft nature of enameled wires and their ability to adapt to bent and folded shapes make flexible circuit boards better suited to the miniaturized design of cell phones.
Other Electronic Component Connections: Enameled wires are also commonly used to connect other electronic components in cell phones, such as battery connections, button switch connections, and so on. Enameled wires provide reliable electrical conductivity and insulation protection to ensure proper functioning and safe operation between components.
