Category: Materials
Aluminum Plate
Aluminum sheet is a plate material made of aluminum as a base material through a series of processing techniques such as rolling, stretching and cutting.
Copper Strip
Copper strip is a kind of strip material made of copper as the base material through a series of processing technology such as cold rolling, stretching, cutting and so on.
Fiberglass Wrapped Wire
Fiberglass wrapped wire is a type of wire that uses fiberglass as an insulating material and is usually used in harsh operating environments such as high temperature, high pressure and corrosion resistance.
Electrolytic copper
Crude copper (containing 99% copper) is pre-made into a thick plate as the anode and pure copper into a thin sheet as the cathode, and a mixture of sulfuric acid and copper sulfate is used as the electrolyte.
Copper tape
Copper strip is usually made of high purity copper material, which is rolled and drawn in multiple stages.
Copper Foil
Copper foil is a cathodic electrolytic material that is deposited as a thin, continuous layer of metal foil on the substrate layer of the circuit board, which acts as the conductive body of the PCB.
Nickel-Zinc Ferrite
Ni-Zn ferrite is a soft magnetic material made from Ni-Zn mixed oxide, Fe2O3 and other auxiliary materials through a series of processes.
Metal fibers
Metal fiber has good electrical conductivity, mechanical properties and corrosion resistance, and can meet the requirements of different fields of material performance, is a material with a wide range of prospects.
Polyetheretherketone (PEEK)
Polyetheretherketone (PEEK) is a polymer consisting of a ketone bond and two repeating units of the ether bond in the main chain structure, and is a special polymer material.